Advertisement
Watch Display (TMR / ALM / CDT)
Regardless if which display is shown all functions will continue to run in the background.
This e-pill Medication Reminder Alarm Watch allows you to use up to 12 Daily Alarms and
the Count-Down Interval Timer at the same time (in parallel).
Tap button C to move between the three (3) possible displays (MODES):
=> "TIME" (TMR) => "ALARM" (ALM 1-12) => "TIMER" (CDT Count Down Timer) =>
TIME / How to set the correct TIME and DATE (TMR)
Tap (press repeatedly) button C until mode TIME is reached (normal time and date is
shown).
Press & hold button D for 5 seconds to enter the setting mode. TMR is shown the HOUR
is flashing. Tap A or B (up or down) until the correct HOUR is reached. Please pay
attention to AM and PM on the left side of the display.
Tap C
Minutes are flashing. Tap A or B (up or down) until the correct MINUTE is reached.
Tap C
Year is flashing. Tap A or B (up or down) until the correct YEAR is reached.
Tab C
Month is flashing. Month (1=January, 2=February ... 12=December). Tap A or B (up or
down) until the correct MONTH is reached.
Tap C
Day of the Month (1 – 31) is flashing. Tap A or B until the correct DATE is reached.
Tap C
Tap A to select 12 hour mode (AM or PM is shown) or 24-hour mode (Military time).
DAY of the WEEK will automatically be set (Auto Calendar).
Done. Tap D to leave the setting mode and store your Time and Date settings.
VIBRATING ALARM, SOUND ALARM or BOTH
Press and hold button A when in TIME mode, to toggle between Vibrating Alarm (vibration
symbol shown on display) or Sound Alarm (bell symbol shown on display) or Both
(vibration symbol and bell symbol shown on display). This alarm type setting applies to all
alarms and the count-down timer. Alarm duration is 20 Seconds.
Tap button D for Back Light (3 seconds illumination). Please note that using the backlight
often will reduce the battery life significantly.
BACK LIGHT
Advertisement
