Panasonic Viera TH-P42U20Z Operating Instructions Manual page 27

Menu Item
VIERA Link
Power on Link Sets to use Power on Link functions (Off / On) (p. 42)
Power off Link Sets to use Power off Link functions (Off / On) (p. 42)
Standby
Power Save
Intelligent
Auto
Standby
Shipping
Condition
System
Update
Software
Licence
System
Information
Auto
Standby
Power Save
16:9
Overscan
Refresh Rate
Video
Preview
DVI Input
Setting
●
A different menu will be displayed in the mode of SD Card (p. 36 - 40).
●
Only available items can be selected.
Adjustments / Configurations (alternatives)
Sets to use VIERA Link functions (Off / On)
●
VIERA Link functions become available when "VIERA Link" is set to "On" (p. 42).
Controls the power consumption in Standby mode of the connected
equipment to reduce the power consumption (Off / On) (p. 42)
●
This function is available when "VIERA Link" is set to "On" and "Power
off Link" is set to "On".
Makes non-watched or non-used connected equipment go into Standby
mode to reduce the power consumption (Off / On (With reminder) / On
(No reminder)) (p. 42)
●
This function is available when "VIERA Link" is set to "On".
Resets all settings to the original condition (p. 34)
Downloads new software to TV (p. 35)
Displays the software licence information
Displays the system information of this TV
Sets the time the TV automatically goes to Standby mode when no operation
is performed for the selected times (Off / 2 hours / 4 hours)
●
Inserting the SD Card to the card slot does not affect this function.
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going to Standby
mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area for displaying the image (Off / On)
On: Enlarges the image to hide the edge of the image
Off: Displays the image in the original size
●
Set to "On" if noise is generated on the edges of the screen.
●
This function is available when aspect is set to "16:9".
●
This function can be memorized separately for SD (Standard Definition)
and HD (High Definition) signals.
Changes the image processing of the panel
(depending on the input signal) (50Hz / 100Hz)
●
Set to "100Hz" normally.
Selects the displaying of the preview window when a video file is selected
(Off / On)
Changes the black level in the image for HDMI input mode with DVI input
signal manually (Normal / Full)
●
When the DVI input signal from the external equipment, especially from PC,
is displayed, the black level may not be suitable. In this case, select "Full".
●
The black level for HDMI input signal will be adjusted automatically.
27