Sony DMX-R100 Automation Operation page 10

Automation Operation
GUI is touched (changing its colour from yellow to
red). Touching it once more will drop it out.
• INDIVIDUAL CHANNELS
Any controls set to ready on an individual channel
will drop into automation record when the {WRITE}
button for that channel is pressed, and drop out when
it is pressed once more.
• ALL CHANNELS
Any controls set to ready on all channels will drop
into automation record when {MASTER DROP IN}, at
4 5 6
TC AUTOMATION
A B SAFE
ABS TRIM OFF
2
HOURS MINUTES SECONDS FRAMES
3
LTC BARS
7 8
4 5
1 2
0
CLEAR
TC AUTOMATION buttons
the bottom right of the LCD, is touched. Touching it
once more will drop all channels out.
Refer to the illustration 'TC AUTOMATION buttons'
above for the following sections describing the
functionality of buttons related to automation.
1 1 1 1 OFF button 1
{OFF} is set as the system fire-up default. When this
button is lit, the recording and replaying of automation
data is prevented. All functions remain as manual
operations.
1
SNAPSHOT
TO LINK DELETE SETUP
STORE RECALL UNDO
SNAPSHOT
SET LOCATE SET
9
–
SHUTTLE
6
3
ENTER
Automation Operation
+
10