1. TECHNICAL SPECIFICATIONS
Rated power output (20 Hz to 20 kHz)
.................................................................. 300 W (8 Ω load)
.................................................................. 600 W (4 Ω load)
Total harmonic distortion (20 Hz to 20 kHz, 8 Ω load)
.................................................................................. 0.01 %
Output bandwidth (8 Ω load, 0.05 %)
[F] ..................................................................5 Hz to 55 kHz
Frequency response (1W, 8 Ω load)
.................................................3 Hz to 150 kHz (+0 / -3 dB)
Damping factor (20 Hz to 20 kHz, 8 Ω load)
....................................................................................... 200
Inout sensitivity / Inout impedance
.................................................1.7 V / 20 kΩ (BALANCED)
............................................1.7 V / 20 kΩ (UNBALANCED)
S/N (IHF A network, input shorted)
........................................................... 123 dB (BALANCED)
...................................................... 123 dB (UNBALANCED)
Level of voltage amplification
[F] ......................................................... 29 dB (BALANCED)
[F] .................................................... 29 dB (UNBALANCED)
Attenuation ........................................... 0, -3, -6, -9, -12, -∞ dB
Supply voltage
[/F] ....................................................... 100 V AC, 50 / 60 Hz
[/K] ...................................................... 220 V AC, 50 / 60 Hz
[/N] ................................................................AC 230V 50Hz
[/U] ................................................................AC 120V 60Hz
Power consumption
[/F] .............................................................................. 450 W
[/K/N/U] ....................................................................... 500W
4 Ω, 600 W driven .................................................... 1200 W
Dimensions
Width ....................................................................... 459 mm
Height ..................................................................... 198 mm
Depth ...................................................................... 451 mm
Weight ........................................................................... 37.4 kg
2. CAUTION
The layout of this amplifier is well concerned for sound quality.
1. When screws and washers are removed, those parts must
be set to the same places.
2. When wires are removed, the wires must be installed in the
same roots, same places.
3. Do not hold the side panel (001D/002D) and the bracket
(915G) to move the unit when the unit is disassembled.
DIMENSIONS
2.
1.
2.
3.
(001D, 002D)
1
459
Unit : mm
(915G)