Changing Menu Options; Editing With Another Vcr - Sony SLV-SE210B Service Manual

Changing menu options

1
Press MENU, then select USER SET or EASY OPERATION and press
OK.
PICTURE
OSD
TAPE SELECT
COLOUR SYSTEM
TIMER METHOD
ECO. MODE
SELECT :
END : OK
Press M/m to select the option.
2
Press , to change the setting, then press OK.
3
4
Press MENU to return to the original screen.
Menu choices
Initial settings are indicated in bold print.
USER SET
Menu option Set this option to
Adjusting the sharpness of the picture by pressing </,
PICTURE
buttons. Press < to adjust the picture getting softness.
Press , to adjust the picture getting sharpness.
OSD • ON to display the menu on the TV screen.
• OFF to disappear the menu from the TV screen.
• E180 to use an E-180 or shorter type tape.
TAPE SELECT
• E240 to use an E-240 type tape.
• E260 to use an E-260 type tape.
• E300 to use an E-300 type tape.
• AUTO to select the colour system automatically.
COLOUR SYSTEM
• PAL to use the tape recorded in the PAL colour system.
• B/W to use the tape recorded in black and white.
44 Changing menu options

Editing with another VCR

How to connect to record on this VCR
Connect the line outputs of the other VCR to the input connector of this VCR as
shown below.
Example
TV
Other VCR (Player)
Scart
(EURO-AV)
VMC-2121HG Scart cable (not supplied)
: Signal flow
Note
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-
2106HG cable instead and connect the cable to the line out jacks of the other VCR.
46 Editing with another VCR
: 0 9 VPS / PDC DEFAULT : OFF
: ON VIDEOPLUS+ EXTEND : OFF
: E 1 8 0 AUTO POWER OFF : OFF
: AUTO
: VARIABLE
: OFF
SET : SELECT : SET :
EXIT : MENU END : OK EXIT : MENU
Your VCR (Recorder)
AV1
(EURO AV)
Menu option Set this option to
TIMER METHOD • VARIABLE to display the TIMER METHOD menu for
• STANDARD to display the TIMER menu when
• VIDEOPLUS to display the VIDEOPLUS menu when
For details, see page 32 and 36.
ECO. MODE • ON to turn off the indicators in the display window to
• OFF to turn on the indicators in the display window
EASY OPERATION
Menu option Set this option to
• OFF to deactivate the VPS/PDC function.
VPS/PDC
DEFAULT
• ON to activate it.
VIDEOPLUS+ • OFF to deactivate the VIDEOPLUS+ Extend function.
EXTEND
• 10/20/30/60 (minutes) to extend the time of the VIDEO
AUTO POWER OFF • OFF to deactivate the Auto Power Off function.
• 2HOUR/3HOUR to turn the VCR off automatically if no
Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or LP.
1
Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause).
Press z REC on this VCR to set it to recording pause.
3
To start editing, press the X (pause) buttons on both VCRs at the same
4
time.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press X (pause) on this VCR when an
unwanted scene begins. When it ends, press X (pause) again to resume recording.
1-11
selecting STANDARD or VIDEOPLUS when pressing
the TIMER button.
pressing the TIMER button.
pressing the TIMER button.
conserve the VCR's power.
while the VCR is standing by.
Plus+ setting by the selected amount of time.
signal is received and you do not press any of the buttons
during this time.
Changing menu options
z REC
X
Editing with another VCR
45
47