Print Settings (Dpof Setting) - Panasonic Lumix DMC-FP1 Basic Operating Instructions Manual

Print settings (DPOF setting)

You can perform settings such as the number of copies to print for still pictures (JPEG or TIFF format) in a memory card that were recorded
with a digital camera.
The memory card that contains the pictures with the print settings can then be used with a printer or other device that supports DPOF.
Preparation:
Connect your device, such as an SD card reader/writer in which a
memory card is set.
A
C
D
Tips
●
If you change a file name of a picture etc. on the PC, the picture
cannot be print set.
●
Pictures on memory cards unsupporting DPOF cannot be print set.
●
The contents of the print setting will be saved as [AUTPRINT.MRK] in
the [MISC] folder in the memory card.
1
Select [Output] → [Print Set[DPOF]] from
the menu.
2
Select a drive (memory card) and click
[Next].
3
Select a picture by selecting its check
B
box and click [Execute].
4
Select a picture.
E
5
Set the number of copies to print.
: Print.
A
: The settable range for the number of copies to print is 0 to
B
999.
(If 0 is set, printing is not performed.)
: Do not print.
C
: Print the recording date.
D
: Total number of pictures set for printing.
E
Click [Apply All] to apply the same settings to all the selected
pictures.
6
Click [OK].
7
Click [Close].
Utilizing pictures
87