Toshiba Satellite A30 Series User Manual page 108

5. Slide your fingernail or a thin object under the cover and lift it off.
6. Fit the module's connectors into the computer's connectors at about
a 45 degree angle and press the module carefully to ensure a firm
connection.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
7. Push the module down so it lies flat. Latches on either side will click
into place to secure the module.
8. Seat the cover and secure it with one screw.
9. Replace the battery pack as described in Chapter 6, Power and
Power-Up Modes.
10. Turn the power on and make sure the added memory is recognized.
Satellite A30 Series
Removing the memory module socket cover
Installing a module
Optional Devices
7-5