Related Manuals for FLI Audio FU720.4-F1
Summary of Contents for FLI Audio FU720.4-F1
- Page 1 Инструкция для FLI Underground FU720.4-F1 Перейти в карточку товара 8 800 775 98 98...
- Page 2 UNDERGROUND INSTRUCTION & INSTALLATION MANUAL AMPLIFIER FU720.4 MODEL: FU720.4...
-
Page 3: Installation
This instruction manual is for your safety and must be adhered to at all times. Please read and ensure that you fully understand the installation and set up procedures as explained. If you are unclear on the installation or set up of your FLI UNDERGROUND amplifi er please contact your nearest authorised FLI UNDERGROUND dealer. -
Page 4: Amplifier Installation
AMplifier Installation Your FLI UNDERGROUND amplifi er is designed with a swift installation routine in mind. Please mount the amplifi er in a dry location on a solid surface. NEVER mount the amplifi er upside down, this will cause the amplifi er to over heat and will eventually damage the amplifi... - Page 5 ground cable • The ground cable needs to carry the same current as the power cable. At least an 8 gauge cable should be used. • The amplifi er ground should be connected directly to the chassis of the vehicle, to bare metal.
- Page 6 For connection to the speakers. See system wiring overleaf for wiring examples. G . FUSE Please ensure the following fuse rating is used when replacing fuses: FLI UNDERGROUND 720.4 (25 amp x 2) H. POWER CONNECTIONS Power connections. See overleaf for details on correct connections.
-
Page 7: High Level Input
System Wiring Input connections Connect to remote turn-on Connect to lead of source unit chassis / ground SOURCE (HEAD UNIT) of vehicle FUSE BATTERY High level input When using a high level speaker input, use the supplied high to low level converter loom. WHITE WHITE/BLACK High to... - Page 8 System Wiring 4 Channel Stereo MIN. 2 MIN. 2 System Wiring 2 Channel Stereo, Bridged (mono) MIN. 2 MIN. 4...
- Page 9 • Check that the negative wire is connected to the ground terminal on the amplifi er. • Ensure that the correct rated fuse is fi tted: FLI UNDERGROUND 720.4 (25 amp x 2) DISTORTED SOUND • Check the gain control is not set at too high a level. If the speakers sound distorted turn the down the gain until the sound is clear.
- Page 10 notes...
-
Page 11: Specifications
specifications Model FU360.2 FU720.4 FU1000 .1 FU1000.5 Type 2/1 channel 4/3/2 channel monoblock 5/4/3 channel Class 4 ohm stereo 2 x 70 watts RMS 4 x 70 watts RMS 4 x 70 watts RMS 2 ohm stereo 2 x 90 watts RMS 4 x 90 watts RMS 4 x 90 watts RMS 4 ohm mono... -
Page 12: Limited Warranty
International copyright laws. All rights reserved. TRADEMARKS FLI UNDERGROUND™, FU™, UNDERGROUND™ and all stylised representations of product names, or the abbreviations of product names, as logos are all trademarks of FLI. Graphics and logos are trademarks or trade dress of FLI Audio or its subsidiaries. FLI’s trademarks and trade dress may not be used in connection with any product or service that is not FLI’s, in any manner... - Page 13 AVAILABLE NOW IN THE FLI UNDERGROUND RANGE: UNDERGROUND up to up to speakers 270 watts 270 watts FU 4 FU 5 FU 6 FU 69 FU 5c FU 6c up to up to subwoofers 1200 watts 1200 watts FU 10...
- Page 14 FLI Underground FU720.4-F1 Описание...