Operations - Onkyo LS3100 Instruction Manual

Operations

Operations
ON/STANDBY
ON/STANDBY LED
Turning On the controller
1
Press ON/STANDBY on the top panel.
or
Press on the remote controller.
The controller comes on, and the
ON/STANDBY LED lights white.
Press ON/STANDBY or
the controller to standby mode.
Tip
• For details on power management settings, see
"Setting the Auto Power On" (➔ page 18).
Note
• To prevent any loud surprises when you turn on the
controller, always turn down the volume before you
turn it off.
/ INPUT
VOLUME +/-
SOUND MODE
SUBWOOFER +/-
Volume –/+
/TV input
Bluetooth LED
again to set
Enjoying the sound
■
Operating with the remote controller
1
Turn on the connected TV.
2
INPUT to select the TV
Press
selector.
See also:
• "Listening to an audio from Bluetooth
device" (➔ page 19)
3
To adjust the volume, use VOLUME +/–.
4
Select a sound mode and enjoy!
See also:
• "Using the Sound Modes" (➔ page 19)
■
Operating on the controller
1
Turn on the connected TV.
2
Press the /TV input button repeatedly
until the Bluetooth LED goes off to
select the TV selector.
3
To adjust the volume, use the
Volume –/+ buttons.
Tip
• Adjust the volume by 1 step in the 0 to 35 range.
• The ON/STANDBY LED flashes by receiving the
signal from the remote controller.
• When the Auto Power On function is set to on, the
controller is automatically turned on by receiving
the audio input from the TV and the TV selector is
selected.
En
17