Advertisement
Performance Data
_______________________________________________
Please Contact Yanmar for Details
kW to Hp conversion used is expressed as: HP = (kW value) x 1.34
Rated Speed (rpm)
1800
Ratings Definitions and Conditions
_____________________________________________________________________________________________________
*Rated power listed is NET engine output. The engine
operating environment and driven machine conditions
must be studied carefully when selecting an engine in
order to ensure correct engine selection, maximize
engine performance, extend engine service life and
improve machine capacity.
Consult the TNV Application Manual for additional en-
gine ratings and engine application information.
_____________________________________________________________________________________________________
Materials and specifications herein are intended to serve as a guide in engine selection and subject to change without notice.
The International System of Units (SI) is used in this publication. Yanmar and its logos, as well as corporate identity used
Net rated kW
18.3
herein, are trademarks of Yanmar and may not be used without permission.
3TNV84T-BGGE
Dimensions
_________________________________________
Length
Width
Height
Note: Dimensions depend on final specifications.
Net rated HP
24.6
Application standards for Yanmar industrial engines: Inlet
air standard conditions with a total barometric pressure of
100kPa (29.5 in. Hg), with 30% relative humidity and 25°
C (77°F).
Printed in USA
Industrial Diesel Engine
23.6 in (600 mm)
20.2 in (514 mm)
27.6 in (700 mm)
© 11.19.09 Yanmar
All Rights Reserved
Advertisement
