Table of Contents
Advertisement
2.0
3.0
4.0
Octo Beam WW
Master-Slave Operation:
units together and operate without a controller. In Master-Slave opera-
tion one unit will act as the controlling unit and the others will react to
LED-SC25
the controlling units programs. Any unit can act as a Master or as a
Slave.
1. Using appropriate XLR cables, daisy chain your units together via
the XLR connector on the rear of the units. Remember the Male
XLR connector is the input and the Female XLR connector is the
output. The first unit in the chain (master) will use the female XLR
2.0
3.0
4.0
con nector only - The last unit in the chain will use the male XLR
con nector only. For longer cable runs we suggest a terminator at
the last fixture.
2. Set the Master unit to your desired operational mode. After you
have set your desired operational mode, press the MENU button
until "SLND" is displayed, and Press ENTER. Use the UP or
DOWN buttons to find the "MAST" setting and press ENTER.
3. On the slave units
tap the MENU button until "SLND" is display-
ed, and Press ENTER. Use the UP or DOWN buttons to switch
between either "SL 1" or "SL 2". Once you have made your
choice, press ENTER. For more info see page 8.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout. See UC3 Control below.
INNO POCKET SPOT
Octo Beam WW
Blackout
Blackout the fixture
Function
1. Synchronous strobe by auto.
2. Synchronous strobe by sound
2.0
3.0
Mode
Sound 1
(LED OFF)
INNO SCAN PRO
ADJ Products, LLC - www.adj.com - Octo Beam WW Instruction Manual Page 14
2.0
3.0
4.0
5.0
Master-Slave Set Up
This function will allow you to link up to 16
0m(
)
5.0
UC3 Control
0m(
)
13
Select show
1-12
4.0
5.0
6.0
Show
(LED slow blinking)
0m(
)
16
5.0
Octo Beam WW
0
1.0
Distance(m)
Octo Beam WW
Channel
Value
1
0 - 7
8 - 27
28 - 47
48 - 67
68 - 87
88 - 107
108 - 127
128 - 147
148 - 167
168 - 187
188 - 207
208 - 227
0
1.0
Distance(m)
228 - 247
248 - 255
Note: All shows are sound active when a music source is pres-
ent.
Octo Beam WW
Channel
Value
1 - 8
0 - 255
INNO SCAN HP
ADJ Products, LLC - www.adj.com - Octo Beam WW Instruction Manual Page 15
Octo Beam WW
2.0
3.0
1 Channel Mode
Function
SHOWS
BLACKOUT
SHOW 1
SHOW 2
SHOW 3
SHOW 4
SHOW 5
SHOW 6
SHOW 7
780
356
SHOW 8
SHOW 9
SHOW 10
SHOW 11
2.0
3.0
SHOW 12
RANDOM SHOW
8 Channel Mode
Function
DIMMER
0% - 100%
Distance(m)
0m(
)
16
UC3 Control
0m(
)
5
4.0
5.0
207
143
0m(
)
60
4.0
5.0
0
1.0
Advertisement
Table of Contents
