Table of Contents
Advertisement
DRIVE AND BIAS ADJUSTMENTS
Note 1.
Red/Blue Drive Adjustments in Service Menu NO. 8F DRV:
Adjust Red and Blue Drive Levels alternately with 1, 3, 7,
and 9 keys on the remote control. (See Figure 1.) The Drive
Level adjustment data will be written in the Service Menu
No. 4A RD and 4C BD automatically.
1
2
3
(N/A)
RD(+)
RD(–)
4
5
6
(N/A)
(N/A)
(N/A)
7
8
9
BD(–)
(N/A)
BD(+)
Figure 1.
Note 2.
Red/Green/Blue Bias Adjustments in Service Menu
NO. 90:
Adjust each Bias Level with 1, 3, 4, 6, 7, or 9 key on the
remote control. (See Figure 2.) The Bias Level adjustment
data will be written in the Service Menu No. 47 RB,
No. 48 GB, and No. 49 BB automatically.
2
3
1
RB(+)
RB(–)
(N/A)
4
5
6
GB(+)
GB(–)
(N/A)
7
8
9
BB(–)
(N/A)
BB(+)
Figure 2.
FOR RED DRIVE ADJUSTMENT
FOR BLUE DRIVE ADJUSTMENT
FOR RED BIAS ADJUSTMENT
FOR GREEN BIAS ADJUSTMENT
FOR BLUE BIAS ADJUSTMENT
PROGRAM CODE
The microprossesor used in this model is a multi-purpose
type and is used in several different models. To ensure
proper operation and the correct features for your
particular model, the Program Code must be correct.
Note 3.
Option Data (NO. 83 OPT) should be set to hexadecimal 84.
See page 3 INITIAL DATA SETUP step 18 for set up
procedure. If this program code is wrong the TV will not
operate properly.
BIT
FUNCTION
0, 1
NOT USED
2
AV FUNCTION
3 ~ 7
NOT USED
Note 4.
Option Data (NO. 84 OP2) should be set to hexadecimal 00.
If this program code is wrong the TV will not operate
properly.
BIT
FUNCTION
0
V–GUIDE
1 ~ 7
NOT USED
8
GAME MODE
— 5 —
DATA
0
1
–
–
NO AV
AV
DATA
0
1
YES
NO
–
–
NO
YES
Hide quick links:
Advertisement
Table of Contents
