JVC HD-Z56RF7/A Service Manual page 96

Install the NEW lamp unit
4
Unpack
1
Do not drop the lamp!
Do not shock the glass surface of
the lamp!
It may shatter the lamp causing injuries.
Insert
2
Make sure the lamp sits securely
and fl at in the housing area.
Reinstall the lamp cover
3
Tighten the screw.
Plug in the TV
5
Never touch the glass
!
surface of the lamp!
Oils deposited from the fi nger may
cause a difference in temperature
when the lamp heats up to its
operating temperature, causing the
lamp to break.
Re-tighten
Turn the TV on
If the lamp unit is not installed securely
(e.g. fl at in the lamp housing area), the
TV won't turn on. In this case, reinstall
the lamp unit.
Reset the lamp timer
6
Display the menu bar
1
Select "Set Up"
2
Set Up
Select "Lamp Timer Reset"
3
Set Up
Auto Program
Edit/Manual
Language
Video-1 Setting
Video-3 Setting
AI Volume
Teletext Language
HDMI Setting
PC Position
Lamp Timer Reset
Finish
4
Press OK to Reset
the Lamp Timer
Finally, the lamp has been replaced!
7
Never dispose of the lamp with normal trash!
!
The lamp contains a small amount of mercury. For disposal or recycling information, please
contact your local authorities or consult your retailer.
Dispose of it in the same way as disposing of fl uorescent lamps.
If the power lamp and LAMP indicator blink rapidly after turning on the TV
select
next
select
Video
Video
Off
next
The Lamp Timer is
Reset Successfully
"Lamp" (P. 21)
5