LG 50PS60 Training Manual page 94

Control Board P200 Connector Pin ID and Voltages
Control Board P200 Connector Pin ID and Voltages
Voltage and Diode Mode Measurements for the Control PWB.
Note: There are no voltages in Stand-By mode.
P200 CONNECTOR "Control PWB " to "Power Supply PWB" P813
Pin
1
2
3
4
5
6
7
8
Diode Mode Readings taken with all connectors Disconnected, (Unless Specified). Black lead on Gnd. DVM in Diode Mode.
NOTE: The Black wire on
P200 Connector is not pin 1.
Label Run
M5V 5V
M5V 5V
M5V 5V
M5V 5V
Gnd Gnd
Gnd Gnd
Gnd Gnd
Gnd Gnd
Diode Mode Diode Mode
Connected Disconnected
0.75V 0.92V
0.75V 0.92V
0.75V 0.92V
0.75V 0.92V
Gnd Gnd
Gnd Gnd
Gnd Gnd
Gnd Gnd
93 Fall 2009 1080P Plasma 50PS60
P200
1