LG 50PS60 Training Manual page 55

Y - SUS – Vy and VSC Adjustments
Y - SUS – Vy and VSC Adjustments
1) Pre-Heat unit for at least 10 Minutes before making adjustments.
Vs and Va adjustments complete.
2) Place unit into White Wash from the Customer's Menu for all adjustments.
3) Be sure to use all adjustment values as indicated on your panel's
voltage label in the upper right of the panel. (Example shown above)
PROCEDURE: (See figures for locations)
4) Adjust –Vy using VR902.
Measured across –Vy TPs R305.
Match your specific Panel's Voltage
label ±1V.
5) Adjust VSC using VR901.
Measured across VSC TPs R306.
Match your specific Panel's Voltage
label ±1V.
-Vy VR902
VSC VR901
Location Bottom Center
54 Fall 2009 1080P Plasma 50PS60
-Vy TP R305
Location Lower left
VSC TP R306
Location Lower Center