Door Sw Board - Sony CDP-CX455 Service Manual

CDP-CX455

3-8. DOOR SW Board

1 screw (PTPWH 2.6 × 8)
2 gear (cam)
Precaution during the gear (cam) installation
1 Move the slider (pop-up) and the lever (pu joint) fully
in the direction of the arrow A .
slider (pop-up)
A
The levers of the two rotary switches on the D. SW board
are shown in the illustration below.
12
3 screw (PTPWH 2.6 × 8)
lever (pu joint)
two rotary switches
DOOR SW board
4 gear (B)
2 Install the gear (cam) in the direction shown
in the illustration and rotate it fully
in the direction of the arrow B .
3 When the gear (cam) happens to go too deep,
return it to the original position
in the direction of the arrow C .
5 two screws
(BVTP 2.6 × 8)
6 DOOR SW board
B
gear (cam)
C