T872-T874 Thermostat Cross Reference - Honeywell T874 Product Data

CROSS REFERENCE
The following section lists the current T874 Trade replace-
ments for T872 and T874 Multistage Thermostats. It also lists
the Q674 Trade replacements for Q672 and Q674 Subbases.
All thermostats listed carry the Honeywell logo unless
otherwise noted.
When using the Cross Reference Charts, refer to the following
instructions:
1. Locate and identify the existing thermostat and subbase
model.
2. Refer to the Model Number column to find the model
that matches the existing thermostat and subbase.
Model Number
T872A 1-stage heat, 1-stage cool
A1006 Standard OEM
A1014 72-78°F (22-26°C) stop; locking cover; no
thermometer
A1022 Heat anticipator set at 0.45A
A1030 0.4A heat anticipator setting
A1048 TRADELINE
A1055 AAF logo; locking cover
A1063 Climatrol logo
A1071 Lennox logo; 0.5A heat anticipator setting
A1089 Melco logo
A1097 Westinghouse logo
A1105 Amana logo; 1.2A heat anticipator setting
A1113 Trane logo
A1121 Airtemp (Chrysler) logo
A1139 Singer logo; no. 02005384
A1147 American Standard logo
A1154 Carrier logo and color; no. HH07AT074
A1162 General Electric logo; no. AY28X097
A1170 Sears logo; no. 4291441
A1188 Command-Aire logo
A1196 Singer logo; Celsius scale; no. 02005521
A1204 Carteret logo
A1212 General Electric; no. AY28X114; 72-78°F
(22-26°C) stop
A1220 Singer logo; no. 050240-01
A1238 Celsius scale
A1246 TRADELINE; locking cover and adjustable locking
lever stops
A1253 Trane Comfort Corp
A1261 TRADELINE; 72-78°F (22-26°C) stop; locking
cover; no thermometer; meets DoD specs
a
When replacing a T872 Thermostat and Q672 Subbase, always replace both the thermostat and the subbase.
Table 6. T872-T874 Thermostat Cross Reference.
Description
29
T874 MULTISTAGE THERMOSTATS AND Q674 SUBBASES
3. The Description column identifies certain characteristics
of the existing device.
4. The Trade Replacement column identifies the correct
replacement device.
5. The Remarks column lists any characteristics or adjust-
ments to be made on the Trade replacement model.
6. The Fig. No. column lists the wiring hookup used for the
specific model number. The wiring diagrams follow the
Cross Reference section.
7. Refer to the circuit illustration that corresponds with the
appropriate number. This figure illustrates the internal
electric circuit for the desired model number.
T874 Trade
Replacement a
T874A1036
T874A1010
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1036
T874A1010
T874A1036
T874A1036
T874A1150
T874A1036
T874A1176
Remarks
Use T874A1176 for Dept. of
Defense (DoD) application.
Use T874A1176 for Dept. of
Defense (DoD) application.
60-2485—8