Radio Aerial Connections; Digital Device Connections - Sony AVD-K150B Service Manual

AVD-K150B/K150E/K150G/K150N/K150R
Connections (Continued)

Radio Aerial Connections

Connect the supplied FM/AM antennas for radio listen-
ing.
Connect the AM loop antenna to the AM antenna
1
connectors.
Connect the FM wire antenna to the FM antenna
2
connectors.
Notes
• To prevent noise pickup, keep the AM loop antenna
away from the DVD/VCR Receiver and other compo-
nents.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as hori-
zontal as possible.
Accessory Audio/Video (A/V)
Connections to DVD/VCR Receiver
Connect the AV3 IN jacks on the DVD/VCR Receiver to
the audio/video out jacks on your accessory compo-
nent, using optional audio/video cables.
10

Digital Device Connections

Connect the OPTICAL IN jacks on the DVD/VCR
Receiver to the digital audio out (optical) jacks on your
digital device (Game device, Digital Set Top Box, etc.),
using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press INPUT SELECT repeatedly on the remote control
until "AV3 OPT" appears in the display window.
Notes
• If the audio format of the digital output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
• The Optical input function is available only when the
other unit's Sampling Frequency is 32 - 48kHz.