Advertisement
Performance Data
_______________________________________________
Please Contact Yanmar for Details.
kW to Hp conversion used is expressed as: HP = (kW value) x 1.34
Rated Speed (rpm)
1800
Ratings Definitions and Conditions
_____________________________________________________________________________________________________
*Rated power listed is NET engine output. The engine
operating environment and driven machine conditions
must be studied carefully when selecting an engine in
order to ensure correct engine selection, maximize
engine performance, extend engine service life and
improve machine capacity.
Consult the TNV Application Manual for additional en-
gine ratings and engine application information.
_____________________________________________________________________________________________________
Materials and specifications herein are intended to serve as a guide in engine selection and subject to change without notice.
The International System of Units (SI) is used in this publication. Yanmar and its logos, as well as corporate identity used
Net rated kW
7.3
herein, are trademarks of Yanmar and may not be used without permission.
Dimensions
_________________________________________
Note: Dimensions depend on final specifications.
Net rated HP
9.8
Application standards for Yanmar industrial engines: Inlet
air standard conditions with a total barometric pressure of
100kPa (29.5 in. Hg), with 30% relative humidity and 25°
C (77°F).
Printed in USA
3TNM68-GGE
Industrial Diesel Engine
Length
21.2 in (538 mm)
Width
16.6 in (421 mm)
Height
20.8 in (528 mm)
© 11.19.09 Yanmar
All Rights Reserved
Advertisement
