Toshiba 32AV83*G Manual page 57

Q
Why are the colours wrong when an
NTSC source is played?
Connect the source via a SCART cable
A
and play. Select Manual setting from
the SETUP menu and set the Colour
System to Auto.
Manual setting
Colour system: Auto
EXT 1
Select Change
Q
What can be done if the user-defined
password has been forgotten?
A
Use the universal password 1276, then
change to a new number of your choice.
Q
Why don't the devices connected via
HDMI operate properly?
Make sure to use cables with the HDMI
logo ( ). Some early HDMI
A ®
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
Why is the VCR/DVD picture in black
and white?
A
Check the correct input has been chosen:
S-VIDEO or AV.
Q
Why did TV turn off by itself?
After roughly 15 minutes without any
A
input video signal at TV mode, the TV
will turn off to save power.
A
Save Back
OK RETURN
57