Dlan Av Network Encryption At The Touch Of A Button - Devolo dLAN 500 AVtriple+ Quick Manual

The factory default password is
HomePlugAV.
Assigning
password to a single adapter will
exclude it from the remaining dLAN
network.
If dLAN Cockpit is called up again later after a suc-
cessful initial installation, for example to integrate a
new adapter into a network, the application remem-
bers the devices that were entered earlier. Enter the
new device as described in the Adding an adapter
section. The current network password is assigned
automatically to the newly added device.
4.3 dLAN AV network encryption at
the touch of a button
To encrypt a dLAN AV network, in which all associated
devices are equipped with an encryption button, simply
press the encryption button that is located on the de-
vice. Pressing this button will encrypt your dLAN AV
network with a randomly generated password.
a specific
Adapters cannot be configured while
in Standby mode.
The following section contains exact instructions on
the basis of possible network scenarios:
dLAN network 23
devolo dLAN 500 AVtriple+