Honeywell Q682 User Manual page 15

Troubleshooting (Continued)
Problem
Energy saving
temperature
program is
12 hours.
Rooms do not
warm up at the
programmed
time.
2
Temperature
change occurs
at the wrong time.
Room temperatures — Positions of thermostat set
are not correct.
Check
— Program dial for proper day
or night phase.
— Timer program for heating
system may need more time
to warm up rooms.
— Program pins for correct time
locations.
point levers.
— Position of subbase system
switch (heating-cooling model).
Action
Turn timer ahead 12 hours. Turn
knob clockwise
Move red pin one-half hour earlier
on the program dial.
Relocate pins to desired settings.
Reset to desired temperatures.
Move to desired operating position.
15
only.
(continued)
69-0643—1