Ssl SLR10DVC Specifications

10” (25 cm) subwoofer slr series

Enlarged version

Congratulations on your purchase of this Sound Storm Laboratories (SSL)

SLR Series Subwoofer. SSL takes great pride in producing products that

look great, sound great, and stand up to the daily rigors applied by audio

enthusiasts around the world. We appreciate your confidence and support

and thank you for choosing SSL.

Table of Contents

Need help?

Do you have a question about the SLR10DVC and is the answer not in the manual?

Page 1 Congratulations on your purchase of this Sound Storm Laboratories (SSL) SLR Series Subwoofer. SSL takes great pride in producing products that look great, sound great, and stand up to the daily rigors applied by audio enthusiasts around the world. We appreciate your confidence and support...
Page 2 SLR10DVC 10” (25 cm) Subwoofer  Dual 4 Ω Voice Coils  2000 W Peak Power Handling  High Efficiency Polypropylene Cone  Butyl Rubber Surround...
Page 3 Product Specifications Impedance Dual 4 Ω 35.3 Hz 0.680 4.037 Technical Support 0.818 If you need technical support with your SSL product or have 1.091 ft³ (30.9 liters) questions about its use, please contact us: Xmax 10 mm 805.751.4855 Sensitivity (1 W/ 1 m) 84 dB Peak Power Handling 2000 W...
Page 4 Wiring your Subwoofer Enclosures The SLR10DVC is designed to work in a compact sealed enclosure, of Parallel Series 0.60ft³. Since the woofer has pole-vent, it needs a minimum clearance from the rear wall of the enclosure of 0.75” (19 mm). Below you will find the dimensions to make the enclosure to suit the subwoofer, it has been designed for maximum output while retaining great sound quality.