Power Supply Block And G Board Removal - Sony VPL-HS2 Service Manual

1-2-10. Power Supply Block and G Board Removal

To remove the G board and power supply block, remove the C board and MS board beforehand.
1 Two screws
(+B 3x6)
2 Holder (B)
3 Two screws
(+B 3x6)
A
G Board Removal
!- GL sheet
!= Remove the G board
in the direction of the arrow C.
1-8
4 Remove the power block assy
in the direction of the arrow A.
7 Screw
(+PSW 3x8)
CN709
CN710
CN601
CN602
9 CN1 (5P)
Power Supply Block Removal
Power supply block
6 Remove the Power supply block
in the direction of the arrow B.
B
CN708
Three claws
0 G holder assy
C
Power block assy
5 Four claws
CN1
CN1
8 Earth plate (G)
VPL-HS2