Sony DSR-DU1 Brochure & Specs page 5

04
INTRODUCTION
Expanding DVCAM
The DSR-DU1 is a compact videodisk unit that is set to bring a new level of operational versatility to DVCAM
production. Introduced for use with Sony DVCAM and Sony DV camcorders*
of DVCAM/DV stream recording – equivalent to the maximum recording time of a DVCAM tape. Through an
i.LINK ® * 2 (DV) connection, the output of the camcorder's camera is simultaneously recorded to both the hard
drive of the DSR-DU1 and the camcorder's tape cassette.
The DSR-DU1 is an extremely versatile unit. When a shoot has been completed, it can be detached from
the camcorder and used for field off-line logging or EDL creation, as a player for making dubs, or as a source
feeder machine for i.LINK interface equipped nonlinear editors. The DSR-DU1 also offers many other
convenient features that include loop recording to avoid missing an important scene, and interval recording
to capture scenes over a long period.
The i.LINK IEEE 1394 interface on the DSR-DU1 supports two types of protocols which are AV/C (Audio
Video/Control) and SBP2. The DSR-DU1 receives and stores the DVCAM/DV stream from compatible
DV/DVCAM camcorders using the AV/C protocol.
compatible i.LINK interface equipped nonlinear editors*
of the SBP2 protocol, the DV files stored on the DSR-DU1 can be selected on a file basis from the GUI of
the compatible nonlinear editor, and then uploaded to the editor's hard drive at up to two times faster*
real time. The record start and stop time code values of each scene are also transferred to the editor,
eliminating the logging process common to nonlinear editing.
The DSR-DU1 presents an outstanding workflow innovation to DVCAM users in field acquisition and in
production.
Photo shows DSR-DU1 and supplied case.
*1 Please contact your nearest Sony office or authorized dealer for compatible DV camcorders
*2 i.LINK is a Sony trademark used only to designate that a product is equipped with an IEEE 1394 connector.
All products with an i.LINK connector may not communicate with each other. Please refer to the documentation that comes with any device having
an i.LINK connector for information on compatibility, operating conditions, and proper connection.
*3 Please contact your nearest Sony office or authorized dealer for compatible nonlinear products that support AV/C or SBP2 file upload from the
DSR-DU1
*4 The time required to upload DV files from the DSR-DU1 may vary depending on the nonlinear editor used.In the case of downloading DV files from
a nonlinear editor to the DSR-DU1, only the DV AV/C protocol can be used and therefore only real-time speed is supported.
TM production
The DSR-DU1 can then upload the DV files into
3 using either the SBP2 or AV/C protocol. In the case
1 , it provides up to three hours
SONY Video Disk Unit
DSR-DU1
is the logo for products that implement i.LINK.
4 than