8. Select OSD-> SETUP-> Network-> Enabled.
9. Input the following:
IP Address:
Subnet Mask:
Gateway: 0.0.0.0
DNS Server:
10. Press Apply (Enter) to confirm settings.
11. Open a web browser (ex, Microsoft Internet Explorer).
12. In the Address bar, input the IP address: 192.168.10.10.
13. Press Enter.
The projector is setup for remote management. The LAN/RJ45 function
displays as follows.
Company Confidential
192.168.10.2
255.255.255.0
0.0.0.0
Optoma_______________________
69
Rev. 00
Delta____________
2008/07/02