Optoma EX774 Serivce Manual page 43

Rev. 00
Flash-Tool User's Guide (upgrading projector logo)
Step 1: Launch the "FlashTool.exe" from installed short-cut at
Program > Digital Zoom Projector> Launch FlasTool.exe or click the "Lauch FlashTool.exe" shortcut icon on the
desktop.
Step 2: Following is the screen capture when there is no projector connected.
Step 3: Make sure the USB cable is firmly attached between projector and computer; the power switch is in
ON position (if the projector got hardware power switch) and projector is in STAND BY mode.
Press key in sequence on keypad (DP2601/2618/3618 series) or IR remote
<Down>, <Up>, <Right>, <Up>
controller (DP3602 series)。 The power and lamp LED will blink and the Flash-Tool mode will be enabled.
Company Confidential Optoma_______________________ Delta____________
43
2008/07/02