LG 62SX4D-UB Service Manual page 8

• Rotates the input mode between Antenna
• Video 1-2, Front Video, Component 1-2,
RGB-DTV (or RGB-PC), HDMI1/DVI,
and IEEE1394 input sources, screen
returns to the last TV channel.
Selects the remote operating mode: TV,
DVD, VCR, AUDIO, CABLE or STB. Select
other operating modes, for the remote to
operate external devices.
Brings up the main menu to the screen.
Enters or exits a Panel Menu in the TV Guide
On Screen system.
Clears all on-screen displays and returns to
TV viewing from any menu.
Switches the sound on or off.
Lets you select the amount of time before
your TV turns itself off automatically.
Adjusts screen position, size, and phase in
Adjusts the factory preset picture
depending on the viewing environment.
Freezes the currently-viewed picture. Main
picture is frozen in PIP/Twin picture mode.
DESCRIPTION OF CONTROLS
TV INPUT
and Cable.
HDMI2
TV INPUT
MODE
MENU
EXIT
MUTE
TIMER
ADJUST
CC
PC mode.
EZ PIC
FREEZE
TV/VIDEO
External input modes rotate in regular
sequence: Antenna, Cable, Video 1-2,
TV/VIDEO
Front Video, Component 1-2, RGB-DTV
(or RGB-PC), HDMI1/DVI and HDMI2
input sources.
MODE
(Video, Front Video, Component 1-2 input
sources are linked automatically, only if
these are connected )
TV GUIDE
Brings up the TV Guide On Screen sys-
tem to the screen.
INFO
When you watch the TV, information dis-
plays on top of the screen. Not available
in Component 1-2, RGB, HDMI1/DVI and
HDMI2 mode.
Mark
Selects the wanted functions.
FAV
Scrolls the Favorite channels.
FLASHBK
FLASHBK
Tunes to the last channel viewed.
APM
PIP
FREEZE
M/C EJECT
Switches to PIP, POP (Picture-out-of-
Picture) and Twin picture modes in regu-
lar sequence.
Switches the video window locking or
unlocking in the Listings Grid.
PIPCH-/PIPCH+
Changes to the next higher/lower PIP
channel.
PIP INPUT
Selects the input source for the sub pic-
ture in PIP/Twin picture mode.
SWAP
Exchanges the main/sub images in
PIP/Twin picture mode.
- 8 -