SmileCAM SU-320 User Manual page 2

Thank you for purchasing SmileCAM.
Please read the following before using the camera.
[Before using SmileCAM]
: Do not plug out USB port while using application program.
: Do not force the camera head when adjusting it by hand.
: Do not attempt to disassemble the camera by yourself.
( Warranty is invalid if disassembled )
: Do not clean the camera with flammable substances such
as oil or thinner.
: Do not drop the camera or it will cause operational problems.
: Please make sure the lens cap is on when the camera is not in use.
>>If SmileCAM is being used in network behind IP sharer, Router or in firewall, or during
using if there is any problem with Video and Sound, please refer to Customer Service on
www.smilecam.com.
>>If your computer system has USB ports only and doesn' t have Serial Port, you must
equip USB-to-Serial converter to control camera. And if there is only one USB port on your
computer, also USB Hub is required together with USB-to-Serial converter.
All rights reserved. Copying in whole or in part this manual is
prohibited by law. The information contained herein is subject to change in order to improve
reliability, design, or function without prior notice.
Note that set up (installation) and use may be different from the manual supplied with the
product.
Please see SINTEC Home Page with question or comments. www.smilecam.com
SmileCAM is a trademark or a registered trademark of SINTEC Corp.
A patent is pending and a registration of design has been applied for in
Korea, U.S.A and other six countries.
As this product complies with the guidelines of CE, FCC Rules and EMC Registration,
it can be used in all residential or other areas.
[Note]
In case of using notebook(laptop), need to have main adopter
connect to the electric socket. (Only using battery would not have
enough power for SmileCAM to run).