System Setting; Setup; Adjust The Settings; [Language] Menu - LG DVX640H Owner's Manual

System Setting

12 System Setting

Setup

When the unit is turned-on at the first time, you
have to select the desired language. (optional)

Adjust the settings

You can change the settings of the player in the
[SETUP] menu.
1. Press SETUP.
2. Select the first setup option using ws and
press d to move to the second level.
3. Select a second setup option using ws and
press d to move to the third level.
3
4. Select a desired setting using ws and press
ENTER to confirm.
5. Press SETUP to escape from setup menu.

[LANGUAGE] Menu

Menu Language/Disc Audio/Disc
Subtitle/Disc Menu
Select and set the language you prefer.

[DISPLAY] Menu

TV Aspect
Select and set TV aspect ratio according to your TV
type and preference.
[4:3]: Standard TV type
[16:9]: Wide TV type

Display Mode

Select and set Display Mode according to your
preference. Display Mode works only when the TV
Aspect mode is 4:3.
[Panscan]: Display full screen with cut non-
main scene on TV
[Letterbox]: Display wide screen with black
stripe at top and bottom on TV

[AUDIO] Menu

Set the player's Audio options according to various
disc output type you use.
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack.
[Bitstream]: Select to connect DIGITAL AUDIO
OUT jack to an amplifier with Dolby Digital, DTS
or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select
to connect DIGITAL AUDIO OUT jack to an
amplifier without Dolby Digital or MPEG
decoder.
[Off] (for DTS): Select to connect DIGITAL
AUDIO OUT jack to an amplifier without DTS
decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].
DRC (Dynamic Range Control)
To adjust the volume level by itself when Audio
level reaches to more than the specific level (Dolby
Digital only).
Vocal (DVX640H/DVX642H only)
To mix the vocal with music using the multichannel
karaoke DVD.