Table of Contents
Advertisement
12
System Setting
Settings
Adjust the Setup Settings
You can change the settings of the unit in the
[Setup] menu.
1. Press SETUP.
2. Use w/s to select the first setup option, and
press d to move to the second level.
3. Use w/s to select a second setup option, and
press d to move to the third level.
4. Use w/s to select a desired setting, and press
ENTER (b) to confirm your selection.
3
[LANGUAGE] Menu
Menu Language
Select a language for the Setup menu and on-
screen display.
Disc Audio/Disc Subtitle/Disc Menu
Select a language for the Disc Audio/Disc Subtitle/
Disc Menu.
[Original]: Refers to the original language in
which the disc was recorded.
[Other]: To select another language, press
number buttons then ENTER (b) to enter the
corresponding 4-digit number according to
the language code list. (See page 20) If you
make a mistake while entering number, press
CLEAR to delete numbers then correct it.
[Off] (for Disc Subtitle): Turn off Subtitle.
DP126-P.BINDLL_0631-ENG.indd 12
[DISPLAY] Menu
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]: Select when a standard 4:3 TV is
connected.
[16:9]: Select when a 16:9 wide TV is
connected.
Display Mode
If you selected 4:3, you'll need to define how you
would like widescreen programs and films to be
displayed on your TV screen.
[Letterbox]: This displays a widescreen picture
with black bands at the top and bottom of the
screen.
[Panscan]: This fills the entire 4:3 screen,
cropping the picture as necessary.
[AUDIO] Menu
Set the player's Audio options according to various
disc output type you use.
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUTPUT jack.
[Bitstream]: Select to connect DIGITAL AUDIO
OUTPUT jack to an amplifier with Dolby Digital,
DTS or MPEG decoder.
[PCM] (for Dolby Digital / MPEG): Select
to connect DIGITAL AUDIO OUTPUT jack to
an amplifier without Dolby Digital or MPEG
decoder.
[Off] (for DTS): Select to connect DIGITAL
AUDIO OUTPUT jack to an amplifier without
DTS decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].
2012-07-23
6:01:15
Advertisement
Table of Contents
