Sony STR-DA7100ES Service Manual page 14

STR-DA7100ES
About the indicators on the display
Name Function
A SW
Lights up when sub woofer
selection is set to "YES".
While this indicator lights
up, the receiver creates a
sub woofer signal based on
the L.F.E. signal in the disc
being played back or the
low frequency components
of the front channels. This
indicator does not light
during the 2CH STEREO
mode or when a 2 channel
signal is input while [A.F.D.
AUTO] is selected and
[A.F.D. 2CH SW] in the
SURR SET UP menu is set
to "OFF."
B Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes
around the letters vary to
show how the receiver
downmixes the source
sound (based on the speaker
settings). "
when the 9.1 channel
speaker system is activated.
L Front Left
R Front Right
C Center (monaural)
SL Surround Left
SR Surround Right
S Surround (monaural or the
surround components
obtained by Pro Logic
processing)
SBL Surround back left
SBR Surround back right
SB Surround back (the
surround back components
obtained by 6.1 channel
decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: Surround
speakers absent
Sound Field: A.F.D. AUTO
SW L C
SL SR
C ;DIGITAL
Lights up when Dolby
(EX) Digital signals are input.
"EX" lights up when Dolby
Digital Surround EX
signals are decoded.
14
Name
D INPUT
E AUTO
F HDMI 1 2
G DTS (-ES)
H i.LINK
I COAX
" lights up
J OPT
K 96/24
L ANALOG
R
M MULTI IN
N SB DEC
Function
Lights up constantly. One of
the input indicators also
lights up according to the
current input.
Lights up when INPUT
MODE is set to "AUTO
2CH".
Lights up when a playback
component or a playback
component and TV monitor
is connected.
Lights up when DTS
signals are input. "-ES"
lights up when DTS-ES
signals are input. When
playing a DTS format disc,
be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG 2CH FIXED".
Lights up when an i.LINK
component is connected.
Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the COAXIAL
jack, or when INPUT
MODE is set to
"COAXIAL FIXED".
Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the OPTICAL jack,
or when INPUT MODE is
set to "OPTICAL FIXED".
Lights up when the receiver
is decoding DTS 96 kHz/24
bit signals.
Lights up when INPUT
MODE is set to "AUTO"
and no digital signal being
input through the
COAXIAL or OPTICAL
jacks, or when INPUT
MODE is set to "ANALOG
2CH FIXED".
Lights up when "MULTI
CH IN" is selected.
Lights up when surround
back sound decoding is
activated.
Name Function
O D.RANGE
Lights up when dynamic
range compression is
activated.
P SLEEP
Lights up when the sleep
timer is activated.
Q VOLUME
Displays the current
volume.
R EQ
Lights up when the
equalizer is activated.
S MEMORY
Lights up when a memory
function, such as Name
Input, Preset Memory, etc.,
is activated.
T Tuner
Lights up when using the
indicators receiver to tune in radio
stations, etc.
U H.A.T.S.
Lights up when an H.A.T.S.
signal is input from a
component connected to the
i.LINK jack.
V DISCRETE Lights up when DTS-ES
Discrete decoding is
activated.
W MATRIX
Lights up when DTS-ES
Matrix decoding is
activated.
X CINEMA
Lights up when DTS Neo:6
Cinema decoding is
activated.
Y MUSIC
Lights up when Pro Logic
II, Pro Logic IIx Music, or
DTS Neo:6 Music decoding
is activated.
Z NEO:6
Lights up when DTS Neo:6
Cinema/Music decoding is
activated.
wj MOVIE
Lights up when Pro Logic
II, or Pro Logic IIx Movie
decoding is activated.
wk GAME Lights up when Pro Logic
II, or Pro Logic IIx Game
decoding is activated.