Advertisement
TELEPHONE ACCESS MODULE
MODULE
LINE
1
IN
PHONE
OUT
SECURITY SYSTEM
PANEL
1
USE EITHER RJ11 TELEPHONE CONNECTORS OR OPTIONAL
TELEPHONE CONNECTIONS.
Fig. 9. Telephone installation wiring including
monitored security system.
Installing W8735B Module Housing Onto
Subbase
After subbase is mounted and wiring complete, install the
module housing onto the subbase:
1. Align the subbase and the module housing and
press together; see Fig. 10.
2. Insert the 2 ¾ in. screws (provided) into the holes.
3. Tighten screws; be careful not to over tighten.
69-1352
SUBBASE
TO HOUSE
TELEPHONES
NOT
1
USED
Ph 1
Ph 2
Ln 1
Ln 2
TO
SECURITY
SYSTEM
TELEPHONE
OUT
TO TELEPHONE LINE
4. Connect and insert 9 Vdc alkaline battery.
NOTE: 9 Vdc alkaline battery is optional; however,
when the battery is installed in the W8735B, the
power outage alert option is available.
5. Replace the cover. See Fig. 11.
6. Insert the module cover latch pin; see Fig 12.
7. Apply power to the system.
IMPORTANT
The Telephone Access Module does not answer
within the first 90 seconds after applying power
or anytime power is disconnected.
8. Do not attempt to dial in to the Telephone Access
Module for the first 90 seconds after applying
power to allow the Telephone Access Module time
to generate its user menu.
2-3/4 IN. (70)
SCREW (2)
BATTERY
CONNECTOR
BATTERY
M14805
Fig. 10. Installing module onto subbase.
6
MODULE
SUBBASE
M14769
Advertisement
