General - Sony TRINITRON KV-20FS12 Service Manual

The instructions mentioned here are partial abstracts from the Operating Instruction Manual.
The page numbers shown reflect those of the Operating Instruction Manual.
Connecting Your TV
Read this section before setting up your TV for the first time. This section
covers basic connections in addition to any optional equipment you may
be connecting.
Basic Connections
TV with indoor or outdoor antenna, or CATV cable
Depending on the cable available in your home, choose one of the
connections below:
If you are connecting to an indoor or outdoor antenna, you may need to
adjust the orientation of the antenna for best reception.
SECTION 1

GENERAL

Operating Instructions
Connecting Additional Equipment
TV and VCR
Coaxial
Cable
1
From
cable/
antenna
1
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
(Optional connection)
3
If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
You can use the
inputs.
3
4
Rear of TV
2
VCR
3 (Optional connection)
button to switch between the VHF/UHF and VIDEO