Getting Started; Charging The Battery Pack - Canon LEGRIA HV40 Instruction Manual

16

Getting Started

Preparations
Getting Started
Getting Started

Charging the Battery Pack

The camcorder can be powered with a
battery pack or directly using the compact
power adapter. Charge the battery pack
before use.
CHARGE
indicator
1
Connect the power cord to the
compact power adapter.
2
Plug the power cord into a power
outlet.
3
Connect the compact power adapter
to the camcorder's DC IN terminal.
Remove the battery
terminal cover
before attaching the
battery pack
4
5
O
1
2
T
Slide
direction of the arrow and hold it
pressed down. Slide the battery pack
down and then pull it out.
power adapter during use. This is not a
malfunction.
temperatures between 10 °C and 30 °C.
Outside the temperature range of 0 °C to 40 °C,
the charging will not start.
terminal or to the compact power adapter any
electrical equipment that is not expressly
recommended for use with this camcorder.
BATTERY
RELEASE switch
Attach the battery pack to the
camcorder.
Press the battery pack softly into the
battery attachment unit and slide it up
until it clicks in place.
Charging will start when the
camcorder is turned off.
• The CHARGE indicator starts
flashing. The indicator will go out when
the battery pack is fully charged.
• You can also use the compact power
adapter without attaching a battery
pack.
• When the compact power adapter is
connected, even if a battery is
attached its power will not be
consumed.
NCE THE BATTERY PACK IS FULLY CHARGED
Disconnect the compact power
adapter from the camcorder.
Unplug the power cord from the
power outlet and the compact
power adapter.
O REMOVE THE BATTERY PACK
BATTERY RELEASE
IMPORTANT
You may hear some noise from the compact
We recommend charging the battery pack in
Do not connect to the camcorder's DC IN
in the