American Standard Skyline Champion 2112.014 Specification Sheet

SKYLINE CHAMPION
®
ROUND FRONT TOILET
❏ 2112.014
• Vitreous china
• EverClean surface inhibits the growth of stain
®
and odor causing bacteria, mold and mildew on
the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
• 4" non-adjustable, piston action Accelerator™
flush valve
• Round Front siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect tank/bowl coupling system
®
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty
❏ 3110.016 Round Front Bowl
❏ 4077.014 Tank
Nominal Dimensions:
28-3/8" x 19-5/8" x 33-1/8"
(721 x 498 x 841mm)
Fixture only, seat and supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
- includes Flush Performance, Ball Pass
Diameter, Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for Non-
Adjustability - July, 2003 revision
To Be Specified:
❏ Color: 020 White
❏ Seat: (please specify color)
❏ Champion Slow Close
®
Round Front #5330.010
❏ Rise & Shine Round Front #5322.011
❏ Laurel Round Front #5308.014
❏ Supply with stop:
© 2008 AS America Inc.
4
SKYLINE CHAMPION
ROUND FRONT TOILET
FINISHED WALL
721mm
(28-3/8)
32mm ± 6mm
(1-1/4 ± 1/4)
235mm
(9-1/4)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
16mm
(5/8)
264mm
362mm
(10-3/8)
(14-1/4)
C/L OF OUTLET
305mm
(12)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
K31
VITREOUS CHINA
498mm
(19-5/8)
356mm
(14)
SUPPLY
AS
REQ'D
387mm
(15-1/4)
254mm
(10)
152mm
(6)
FINISHED
FLOOR 254mm
(10)
Revised 2/08
4
®
841mm
(33-1/8)