MSI B75MA-E31 series User Manual page 27

trtp
time interval between a read and a precharge command.
tFAW
this item is used to set the tFAW (four activate window delay) timing.
tWCL
this item is used to set the tWCL (Write CAS Latency) timing.
tCkE
this item is used to set the pulse Width for drAM module.
trtL
this item is used to set round trip Latency settings.
==Advanced timing Configuration==
trrdr
Specifies the active-to-active delay of different ranks on the same diMM.
trrdd
Specifies the active-to-active delay of different diMMs.
tWWdr
Specifies the write-to-write delay of different ranks on the same diMM.
tWWdd
Specifies the write-to-write delay of different diMMs.
trWdrdd
Specifies the read-to-write delay of different ranks on the same/ different
diMM(s).
tWrdrdd
Specifies the write-to-read delay of different ranks on the same/ different
diMM(s).
trWSr
Specifies the read-to-write delay of same rank.
trrSr
Specifies the read commands delay of same rank.
tWWSr
Specifies the write commands delay of same rank.
Cpu Features
press <Enter> to enter the sub-menu.
hyper-threading
the processor uses hyper-threading technology to increase transaction rates
and reduces end-user response times. the technology treats the two cores
inside the processor as two logical processors that can execute instructions
simultaneously. in this way, the system performance is highly improved. if you
disable the function, the processor will use only one core to execute the in-
structions. please disable this item if your operating system doesn't support ht
Function, or unreliability and instability may occur.
MS-7808
7