MSI B75MA-P45 seres User Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Motherboard
  5. B75MA-P45 seres
  6. User manual

MSI B75MA-P45 seres User Manual

Ms-7798 (v1.x) mainboard
Hide thumbs
Table of Contents

Advertisement

Quick Links

B75MA-P45 seres
MS-7798 (v1.x) Manboard
G52-77981X1


Advertisement

Table of Contents
loading

Related Manuals for MSI B75MA-P45 seres

Summary of Contents for MSI B75MA-P45 seres

  • Page 1 B75MA-P45 seres MS-7798 (v1.x) Manboard G52-77981X1...

  • Page 2: CopyrGht NotCe

    Preface Preface Copyrght Notce The materal n ths document s the ntellectual property of MICRO-STAR INTERNA- TIONAL. We take every care n the preparaton of ths document, but no guarantee s gven as to the correctness of ts contents. Our products are under contnual mprove- ment and we reserve the rght to make changes wthout notce.

  • Page 3: TechnCal Support

    Alternatvely, please try the followng help resources for further gudance. ◙ Vst the MSI webste for techncal gude, BIOS updates, drver updates, and other nformaton: http://www.ms.com/servce/download ◙ Contact our techncal staff at: http://support.ms.com Safety Instructons ￭...

  • Page 4: Fcc-B RadO Frequency Interference Statement

    Preface Preface FCC-B Rado Frequency Interference Statement Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton.

  • Page 5: Battery InformatOn

    Replace only wth the same or equvalent type recommended by the manufacturer. Chemcal Substances Informaton In complance wth chemcal substances regulatons, such as the EU REACH Regulaton (Regulaton EC No. 1907/2006 of the European Parlament and the Councl), MSI provdes the nformaton of chemcal substances n products at: http://www.ms.com/html/popup/csr/evmtprtt_pcm.html BSMI EMI 聲明...

  • Page 6: Weee (Waste ElectrCal And ElectronC EquPment) Statement

    MSI wll comply wth the product take back requrements at the end of lfe of MSI-branded products that are sold nto the EU.
  • Page 7 MSI će poštovat zahtev o preuzmanju ovakvh prozvoda kojma je stekao vek trajanja, koj maju MSI oznaku  koj su prodat u EU. Ove proz- vode možete vratt na lokalnm mestma za prkupljanje.
  • Page 8  produttor d dett materal saranno obblgat a rtrare ogn prodotto alla fine del suo cclo d vta. MSI s adeguerà a tale Drettva rtrando tutt  prodott marchat MSI che sono stat vendut all’nterno dell’Unone Europea alla fine del loro cclo d vta.

  • Page 9: Table Of Contents

    MS-7798 MS-7798 CONTENTS ▍ Copyrght Notce ....................  Trademarks .................... Revson Hstory.....................  Techncal Support.................. Safety Instructons .................. FCC-B Rado Frequency Interference Statement.......... v Battery Informaton ..................v Chemcal Substances Informaton ..............v BSMI EMI 聲明 ....................v WEEE (Waste Electrcal and Electronc Equpment) Statement ....v Chapter 1 Gettng Started................1-1 Packng Contents ....................
  • Page 10 Preface UTILITIES ......................2-20 SECURITY ......................2-22 Appendx A Realtek Audo ................A-1 Installng the Realtek HD Audo Drver ..............A-2 Software Configuraton ..................A-3 Appendx B Intel SBA ................. B-1 Prerequstes ......................B-2 Installng Intel SBA ....................B-3 Software Configuraton ..................B-3 Help Button ......................B-4...

  • Page 11: Chapter 1 GettNg Started

    Chapter 1 Gettng Started Thank you for choosng the B75MA-P45 Seres (MS-7798 v1.X) Mcro-ATX manboard. The Seres manboards are based on Intel B75 chpset for optmal system efficency. ® Desgned to fit the advanced Intel LGA1155 processor, ® the B75MA-P45 Seres manboards delver a hgh perfor-...

  • Page 12: PackNg Contents

    * These pctures are for reference only and may vary wthout notce. * The packng contents may vary accordng to the model you purchased. * If you need to purchase the optonal accessores or request part numbers, please vst the MSI webste at http://www.ms.com/ndex.php or consult the dealer.

  • Page 13: Assembly PrecautOns

    MS-7798 Assembly Precautons ■ The components ncluded n ths package are prone to damage from electrostatc dscharge (ESD). Please adhere to the followng nstructons to ensure successful computer assembly. ■ Always turn off the power supply and unplug the power cord from the power outlet before nstallng or removng any computer component.

  • Page 14: MaNboard SpecFicatOns

    Gettng Started Manboard Specficatons Processor Support ■ Support 3 Generaton Intel Core™ 7/ Core™ 5/ Core™ 3/ Pentum / Celeron ® ® ® Processors for LGA 1155 socket (For the latest nformaton about CPU, please vst http://www.ms.com/servce/cpu-support) Chpset ■ Intel B75 chpset ®...
  • Page 15 MS-7798 Slots ■ 1x PCIe 3.0 x16 slot ■ 1x PCIe 2.0 x1 slot ■ 1x PCI slot Form Factor ■ Mcro-ATX (22.5 cm X 24.4 cm) Mountng Screw Holes ■ 6x mountng holes...

  • Page 16: Connectors QuCk GuDe

    Gettng Started Connectors Quck Gude DIMM3 SYSFAN2 JUSB_PW2 DIMM2 DIMM4 DIMM1 JPWR2 CPUFAN SYSFAN1 Back Panel JPWR1 PCI_E1 JBAT1 JTPM1 SATA4/ 3 PCI_E2 JCOM1 SATA2/ 1 PCI1 SATA6/ 5 JFP2 JFP1 JUSB_PW1 JCI1 JUSB3 JAUD1 JLPT1 JUSB2 JUSB1...
  • Page 17 MS-7798 Connectors Reference Gude Port Name Port Type Page Back Panel LGA 1155 CPU Socket 1-10 CPUFAN,SYSFAN1~2 Fan Power Connectors 1-21 DIMM1~4 DDR3 Memory Slots 1-16 JAUD1 Front Panel Audo Connector 1-25 JBAT1 Clear CMOS Jumper 1-28 JCI1 Chasss Intruson Connector 1-24 JCOM1 Seral Port Connector...

  • Page 18: Back Panel QuCk GuDe

    Gettng Started Back Panel Quck Gude Mouse Lne-In USB 3.0 Port Lne-Out Keyboard USB 2.0 Port DVI-D Port VGA Port USB 2.0 Port ▶ Mouse/Keyboard The standard PS/2 mouse/keyboard DIN connector s for a PS/2 mouse/keyboard. ® ® ▶ USB 2.0 Port The USB 2.0 port s for attachng USB 2.0 devces such as keyboard, mouse, or other USB 2.0-compatble devces.
  • Page 19 MS-7798 ▶ Yellow Green/ Orange The standard RJ-45 LAN jack s for connectng to a Local Area Network (LAN). Color LED State Condton Left Yellow LAN lnk s not establshed. On(Steady) LAN lnk s establshed. On(flashng) The computer s communcatng wth another computer on the network. Rght Green 10 Mbts/sec data rate...

  • Page 20: Cpu (Central ProcessNg UnT)

    Ths manboard s desgned to support overclockng. Before attemptng to overclock, please make sure that all other system components can tolerate overclockng. Any attempt to operate beyond product specficatons s not recommend. MSI does not guarantee the damages or rsks caused by nadequate operaton beyond product specficatons.
  • Page 21 MS-7798 CPU & Cooler Installaton When nstallng a CPU, always remember to nstall a CPU cooler. A CPU cooler s necessary to prevent overheatng and mantan system stablty. Follow the steps below to ensure correct CPU and CPU cooler nstallaton. Wrong nstallaton can damage both the CPU and the manboard.
  • Page 22 Gettng Started Inspect the CPU to check f t s Evenly spread a thn layer of properly seated n the socket. Press thermal paste (or thermal tape) on the loadng lever down and lock t the top of the CPU. Ths wll help n under the retenton tab.
  • Page 23 MS-7798 Push down on the heatsnk untl the Inspect the manboard to ensure that four clps get wedged nto the holes the clp-ends have been properly on the manboard. Press the four locked n place. hooks down to fasten the cooler. As each hook locks nto poston a clck should be heard.

  • Page 24: MountNg Screw Holes

    Gettng Started Mountng Screw Holes When nstallng the manboard, first nstall the necessary mountng stands requred for a manboard on the mountng plate n your computer case. If there s an I/O back plate that came wth the computer case, please replace t wth the I/O backplate that came wth the manboard package.

  • Page 25: Power Supply

    MS-7798 Power Supply JPWR1: ATX 24-pn Power Connector Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX 24-pn power supply, algn the power supply cable wth the connector and firmly press the cable nto the connector. If done correctly, the clp on the power cable should be hooked on the manboard’s power connector.

  • Page 26: Memory

    Gettng Started Memory These DIMM slots are used for nstallng memory modules. For more nformaton on compatble components, please vst http://www.ms.com/servce/test-report DDR3 240-pn, 1.5V 48x2=96 pn 72x2=144 pn Dual-Channel mode Populaton Rule In Dual-Channel mode, the memory modules can transmt and receve data wth two data bus channels smultaneously.
  • Page 27 MS-7798 Installng Memory Modules Unlock the DIMM slot by pushng the mountng clps to the sde. Vertcally nsert the memory module nto the DIMM slot. The memory module has an off-center notch on the bottom that wll only allow t to fit one way nto the DIMM slot. Push the memory module deep nto the DIMM slot.

  • Page 28: ExpansOn Slots

    Gettng Started Expanson Slots Ths manboard contans numerous ports for expanson cards, such as dscrete graphcs or audo cards. PCIe (Perpheral Component Interconnect Express) Slot The PCIe slot supports the PCIe nterface expanson card. PCIe 3.0 x16 Slot PCIe 2.0 x1 Slot PCI (Perpheral Component Interconnect) Slot The PCI slot supports addtonal LAN, SCSI, USB, and other add-on cards that comply wth PCI specficatons.

  • Page 29: Deo/ GraphCs Cards

    nstalled by way of the manboard’s expanson slots. Addng on one or more dscrete vdeo cards wll sgnficantly boost the system’s graphcs performance. For best compatblty, MSI graphcs cards are recommended. Sngle Vdeo Card Installaton Determne what type of expanson slot(s) the vdeo card wll use.

  • Page 30: Internal Connectors

    Gettng Started Internal Connectors SATA1~6: SATA Connector Ths connector s a hgh-speed SATA nterface port. Each connector can connect to one SATA devce. SATA devces nclude dsk drves (HDD), sold state drves (SSD), and optcal drves (CD/ DVD/ Blu-Ray). * The MB layout n ths figure s for reference only. SATA4 SATA2 SATA1 (6Gb/s)
  • Page 31 MS-7798 CPUFAN,SYSFAN1~2: Fan Power Connectors The fan power connectors support system coolng fans wth +12V. If the manboard has a System Hardware Montor chpset on-board, you must use a specally desgned fan wth a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans.
  • Page 32 Gettng Started JFP1, JFP2: Front Panel Connectors These connectors connect to the front panel swtches and LEDs. The JFP1 connector s complant wth the Intel® Front Panel I/O Connectvty Desgn Gude. When nstallng the front panel connectors, please use the enclosed mConnectors to smplfy nstallaton. Plug all the wres from the computer case nto the mConnectors and then plug the mConnectors nto the manboard.
  • Page 33 MS-7798 JUSB3: USB 3.0 Expanson Connector The USB 3.0 port s backwards compatble wth USB 2.0 devces. It supports data transfer rates up to 5Gbts/s (SuperSpeed). * The MB layout n ths figure s for reference only. USB 3.0 Bracket (optonal) Important Note that the VCC and GND pns must be connected correctly to avod possble •...
  • Page 34 Gettng Started JUSB1~2: USB 2.0 Expanson Connectors Ths connector s desgned for connectng hgh-speed USB perpherals such as USB HDDs, dgtal cameras, MP3 players, prnters, modems, and many others. * The MB layout n ths figure s for reference only. USB 2.0 Bracket (optonal) Important Note that the VCC and GND pns must be connected correctly to avod possble...
  • Page 35 MS-7798 JAUD1: Front Panel Audo Connector Ths connector allows you to connect the front audo panel located on your computer case. Ths connector s complant wth the Intel Front Panel I/O Connectvty Desgn ® Gude. JTPM1: TPM Module Connector Ths connector connects to a TPM (Trusted Platform Module). Please refer to the TPM securty platform manual for more detals and usages.
  • Page 36 Gettng Started JCOM1: Seral Port Connector Ths connector s a 16550A hgh speed communcaton port that sends/receves 16 bytes FIFOs. You can attach a seral devce. JLPT1: Parallel Port Connector Ths connector s used to connect an optonal parallel port bracket. The parallel port s a standard prnter port that supports Enhanced Parallel Port (EPP) and Extended Capabltes Parallel Port (ECP) mode.

  • Page 37: Jumper

    MS-7798 Jumper JUSB_PW1~2: USB power Jumper These jumpers are used to select USB ports powered by VCC5 or 5VSB. Set to 5VSB f you want them provde power n standby mode. Close 1-2 Close 2-3 Keep USB power to Keep USB power to VCC5 (default) 5VSB JUSB_PW1...
  • Page 38 Gettng Started JBAT1: Clear CMOS Jumper There s CMOS RAM onboard that s external powered from a battery located on the manboard to save system configuraton data. Wth the CMOS RAM, the system can automatcally boot nto the operatng system (OS) every tme t s turned on. If you want to clear the system configuraton, set the jumpers to clear the CMOS RAM.

  • Page 39: Chapter 2 Bios Setup

    Chapter 2 BIOS Setup CLICK BIOS II s a revolutonary UEFI nterface that allows you to setup and configure your system for optmum use. Usng your mouse and keyboard, users can change BIOS settngs, montor CPU temperature, select the boot devce prorty and vew system nformaton such as the CPU name, DRAM capacty, the OS verson and the BIOS verson.

  • Page 40: EnterNg

    BIOS Setup Enterng Power on the computer and the system wll start the Power On Self Test (POST) pro- cess. When the message below appears on the screen, please <DEL> key to enter CLICK BIOS II: Press DEL key to enter Setup Menu, F11 to enter Boot Menu If the message dsappears before you respond and you stll need to enter CLICK BIOS II, restart the system by turnng the computer OFF then back ON or pressng the RESET button.

  • Page 41: Boot DevCe PrOrTy Bar

    ■ ECO - Ths menu s related to energy-savng settngs. ■ BROWSER - Ths feature s used to enter the MSI Wnk web browser. ■ UTILITIES - Ths menu contans utltes for backup and update. ■ SECURITY - The securty menu s used to keep unauthorzed people from mak- ng any changes to the settngs.

  • Page 42: OperatOn

    BIOS Setup Operaton CLICK BIOS II allows you to control BIOS settngs wth the mouse and the keyboard. The followng table lsts and descrbes the hot keys and the mouse operatons. Hot key Mouse Descrpton <↑↓→← > Select Item Move the cursor <Enter>...

  • Page 43: Settings

    MS-7798 SETTINGS System Status ▶ System Date Ths allows you to set the system date that you want (usually the current date). The format s <day> <month> <date> <year>. Day of the week, from Sun to Sat, determned by BIOS. Read-only.
  • Page 44 BIOS Setup Advanced ▶ PCI Subsystem Settngs Press <Enter> to enter the sub-menu. ▶ PCIE GEN3 Ths tem s used to enable/ dsable the PCIe generaton 3 support. ▶ PCI Latency Tmer Controls how long each PCI devce can hold the bus before another takes over. When set to hgher values, every PCI devce can conduct transactons for a longer tme and thus mprove the effectve PCI bandwdth.
  • Page 45 MS-7798 ▶ HPET The HPET (Hgh Precson Event Tmers) s a component that s part of the chpset. You can enable t, and wll provde you wth the means to get to t va the varous ACPI methods. ▶ Integrated Graphcs Configuraton Press <Enter>...
  • Page 46 BIOS Setup ▶ Parallel(LPT) Port Ths tem allows you to enable/ dsable the parallel port. ▶ Parallel(LPT) Port Settngs Select an address and correspondng nterrupt for the parallel port. ▶ Devce Mode Select a devce mode for the parallel port. ▶...
  • Page 47 MS-7798 ▶ Resume By RTC Alarm The field s used to enable or dsable the feature of bootng up the system on a scheduled tme/date. ▶ Date/ HH:MM:SS If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume (boot up) on a specfic date/hour/mnute/second specfied n these fields (usng the <+>...
  • Page 48 BIOS Setup Boot ▶ Full Screen Logo Dsplay [Enabled] The OS boots straght to the GUI wthout showng the POST screen, [Dsabled] Shows the POST messages at boot. == Boot Opton Prortes== ▶ 1st~9th Boot These tems are used to prortze the nstalled boot devces. ▶...
  • Page 49 It shows the adjusted CPU frequency. Read-only. ▶ Adjust CPU Rato n OS Enable ths tem to allow CPU rato changes n the OS by usng MSI Control Center II. ▶ EIST Enhanced Intel SpeedStep technology allows you to set the performance level of the mcroprocessor whether the computer s runnng on battery or AC power.
  • Page 50 BIOS Setup ▶ My OC Gene Press <Enter> to enter the sub-menu. ▶ Customze CPU Rato Ths tem allows you to specfic the CPU rato for OC Gene functon. ▶ My GT Overclock Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs for OC Gene functon.
  • Page 51 MS-7798 ▶ Adjusted DRAM Frequency It shows the adjusted DRAM frequency. Read-only. ▶ DRAM Tmng Mode Select whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE- PROM on the DRAM module. Settng to [Auto] enables DRAM tmngs and the followng “Advanced DRAM Configuraton”...
  • Page 52 BIOS Setup Ths tem s used to set the tFAW (four actvate wndow delay) tmng. ▶ tWCL Ths tem s used to set the tWCL (Wrte CAS Latency) tmng. ▶ Advanced Channel 1/ 2 Tmng Configuraton Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng for each channel.
  • Page 53 MS-7798 ▶ OC Profile Save to USB Save the current overclockng settngs to USB flash dsk. ▶ OC Profile Load from USB Load the stored settngs from USB flash dsk. ▶ CPU Specficatons Press <Enter> to enter the sub-menu. Ths sub-menu hghlghts all the key features of your CPU.
  • Page 54 BIOS Setup ▶ Power Technology Ths tem allows you to select the Intel Dynamc Power technology mode. ▶ C1E Support Enable system to reduce CPU power consumpton whle dle. Not all processors support Enhanced Halt state (C1E). ▶ OverSpeed Protecton Montors current CPU draw as well as power consumpton;...

  • Page 55: Eco

    MS-7798 Important Once you clck the “ECO” button n the pre-set area, some tems n ECO menu wll be fixed and un-adjustable. ▶ EuP 2013 Energy Usng Products Lot 6 2013 (EUP) reduces power consumpton when system s off or n standby mode. Note: When enabled, the system wll not support RTC wake up event functons.

  • Page 56: Browser

    BIOS Setup BROWSER Please nstall the MSI "Wnk" applcaton first n the Wndows operatng system wth the MSI Drver Dsc before usng the browser. Then you can clck the BROWSER to access the Internet, e-mal and nstant messagng. Installng Wnk To nstall Wnk, follow the steps below: Power on your computer and enter Wndows operatng system.

  • Page 57: UpdatNg The Bios WTh LVe Update

    MS-7798 Updatng the BIOS wth Lve Update Ths secton tells you how to update the BIOS by usng the Lve Update utlty before enterng Operatng System. Lve Update wll update the BIOS automatcally when connectng to the Internet. To update the BIOS wth the Lve Update utlty: Clck Lve Update button on the BIOS UTILITIES menu.

  • Page 58: Utilities

    Ths tool can detect and update your BIOS onlne so that you won’t need to spend tme searchng manually. Important HDD Backup and Lve Update request Wnk, please nstall the "Wnk" software appl- caton from MSI Drver Dsc n Wndows first. And then you can access these two utltes by clckng ther respectve buttons. 2-20...
  • Page 59 MS-7798 ▶ M-Flash ▶ BIOS Boot Functon Ths allows you to enable/ dsable the system to boot from the BIOS file nsde USB drve (FAT/ 32 format only). ▶ Select one file to Boot When the BIOS Boot functon as sets to [Enabled], ths tem s selectable. Ths tem allows to select partcular BIOS file from the USB/ Storage (FAT/ 32 format only) drve.

  • Page 60: Security

    BIOS Setup SECURITY ▶ Admnstrator Password Set the admnstratve password that wll be requred to enter the BIOS. ▶ User Password Set the user password that wll be requred to enter the operatng system. Important When selectng the Admnstratve / User Password tems, a password box wll appear on the screen.

  • Page 61: AppendX A Realtek AudO

    Appendx A Realtek Audo The Realtek audo provdes 8-channel DAC. To acheve the 8-channel sound effect, the 7th and 8th channels must be plugged nto the output on the front panel. The secton wll tell you how to nstall drver and use the soft- ware.

  • Page 62: InstallNg The Realtek Hd AudO DrVer

    Realtek Audo Installng the Realtek HD Audo Drver You need to nstall the HD audo drver for Realtek audo codec to functon properly be- fore you can get access to 2-, 4-, 6-, 8- channel audo operatons. Follow the procedures descrbed below to nstall the drvers for dfferent operatng systems.

  • Page 63: Software ConfiguratOn

    MS-7798 Software Configuraton After nstallng the audo drver, the “Realtek HD Audo Manager” con wll appear at the notficaton area (lower rght of the screen). You may double clck the con and the GUI wll pop up accordngly. double clck the con It s also avalable to enable the audo drver by clckng the Realtek HD Audo Manager from the Control Panel.
  • Page 64 Realtek Audo ■ Devce Selecton Here you can select a audo output source to change the related optons. The “check” sgn (n orange) ndcates the devces as default. ■ Volume Adjustment You can control the volume or balance the rght/left sde of the speakers that you plugged n front or rear panel by adjust the bar.

  • Page 65: AppendX B Intel Sba

    Appendx B Intel SBA Intel Small Busness Advantage (Intel SBA) provdes ® ® an out-of-the-box hardware-based securty and produc- tvty sute desgned for the small busness user. Intel SBA ncludes a customzable user nterface and several bundled Intel applcatons.

  • Page 66: PrerequSTes

    Intel SBA Prerequstes ■ Supported Operatng Systems Intel SBA supports followng OS: ■ Wndows 7 Professonal 64-bt and 32-bt ■ Wndows 7 Enterprse 64-bt ■ Requred User Permssons You must run the nstaller and the customzaton wzard wth a user that has local ad- mnstrator permssons on the computer.

  • Page 67: InstallNg Intel Sba

    MS-7798 Installng Intel SBA Ths procedure descrbes how to nstall Intel SBA. ■ To nstall Intel SBA: Logon to the computer wth a user that has admnstrator prvleges. Insert the applcaton DVD nto the DVD-ROM drve. The setup screen wll automat- cally appear.

  • Page 68: Help Button

    Intel SBA Password settngs By default, the system s n an unconfigured state. Before the hardware capabltes can be used by Intel SBA software, the system must be configured. Ths s done n the Set- tngs > Password Settngs tab n the man menu of the GUI. Fll out the form to create the new password and clck “Save”.

This manual is also suitable for:

B75ma-p45 series

Table of Contents