Asus Z97M-PLUS User Manual page 76

Idle Power-out Response [Auto]
This item allows you to set the slew rate for the Fully Integrated Voltage Regulator
when it exits manual override mode. Configuration options: [Auto] [Regular] [Fast]
Power Current Slope [Auto]
This item allows you to enhance the power saving condition or the system overclocking
capabiltity. Select a higher power current slope levels for power saving enhancement
or lower power current slope levels for system overclocking enhancement.
Configuration options: [Auto] [LEVEL -4] - [LEVEL 4]
Power Current Offset [Auto]
This item allows you to increase or decrease the output current sensed by the CPU. It
finds the balance between optimal regulating while staying below the current threshold.
Configuration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%]
[12.5%] [0%] [-12.5%] [-25.0%] [-37.5%] [-50.0%] [-62.5%] [-75.0%] [-87.5%] [-100%]
Power Fast Ramp Response [Auto]
This item allows you to enhance the response of the CPU voltage regulator during the
load transients. Use the <+> or <-> to adjust the value. The values range from 0.00 to
1.50. Configuration options: [Auto] [0.00] - [1.50]
CPU Internal Power Saving Control
Power Saving Level 1 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0 A to 80 A at 1 A increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0 A to 50 A at 1 A increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power-saving condition.Use <+> or <-> key to
adjust the value. The values range from 0 A to 30 A at 1A increment.
Extreme Over-voltage [Disabled]
This item allows you to set higher voltages for overclocking. When you enable this item,
you can choose a high level voltage to overclock, but does not guarantee the CPU life.
Configuration options: [Enabled] [Disabled]
CPU Core Voltage [Auto]
This item allows you to configure the amount of voltage fed to the CPU cores. Increase the
voltage when setting a high Core Frequency value. Configuration options: [Auto] [Manual
Mode] [Offset Mode] [Adaptive Mode]
•
•
3-24
The following item appears only when you set the CPU Core Voltage to [Manual
Mode].
[Adaptive Mode] is available for some specific CPU types.
Chapter 3: BIOS setup