Charging The Main Battery - HandHeld Dolphin 7600 User Manual

Charging the Main Battery

The HomeBase powers the terminal and fully charges its main battery pack
in less than four hours.
As battery packs charge, the charging circuitry follows the two-step charging
process (CC-CV) that is recommended for Li-Ion batteries. The process
monitors changes in temperature, current, and voltage.
Inserting a Terminal
1. Install the battery pack in the terminal; see
page 2-1.
2. Power the Dolphin HomeBase; see
on page 8-3.
3. Slide the terminal into the terminal well until the Dock LED lights green
to indicate that the terminal is properly seated.
4. The battery pack begins charging.
Checking Battery Power
To check battery power while the terminal is operating, tap Start > Settings
> Control Panel > double-tap Power
8 - 4
Install the Main Battery
Powering the Dolphin HomeBase
.
Rev D
11/20/2007
on
Dolphin® 7600 User's Guide