Chapter 2 - Getting Started; Out Of The Box - HandHeld Dolphin 7600 User Manual

2
Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 7600 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
• User CD
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
and Repair on page
Step 1. Install the Main Battery
Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand Held Products
!
in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or bat
Step 2. Charge the Batteries
Dolphin terminals ship with both the main battery pack and
internal backup battery significantly discharged of power.
Charge the main battery pack with the Dolphin charging cable
for a minimum of four hours before initial use.
1. Attach the appropriate plug adapter to the plug of the
power cable.
2. Plug the *Dolphin power cable into the
(see page 3-11) on the left side.
3. Insert the plug into the appropriate power source.
*This power cable can also be used to power the
HomeBase (see page 8-1).
Use only the peripherals, power cables, and power adapters from Hand Held Products. Use of peripherals, cables, or
!
power adapters not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.
Dolphin® 7600 User's Guide
11-1.
DC Power Jack
Dolphin
Dolphin Power Cable
Rev D
11/20/2007
Product Service
1
2
2 - 1