Adjusting The Volume Of Calls/Earpiece/Microphone; Switching Between Handsfree Mode And Phone Mode; Notifying Sms Reception; Making A Call - JVC KW-V40BT Instruction Manual

0
Adjusting the volume of calls/earpiece/
microphone
While talking ...
• You can adjust the volume level between -20 to
+8 (initial: 0).
• This adjustment does not affect the volume level
of the other sources.
• Use the monitor panel to adjust the call/earpiece
volume. (Page 6)
0 Switching between handsfree mode
and phone mode
While talking ...
Each time you press the button, the talking method
is switched : handsfree mode
I
~~: phone
mode).
0 Notifying SMS reception
If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has
been received. (Page 37)
• To read a received message, operate the mobile
phone after stopping the car in a safe place.
- You cannot read, edit, or send a message
through the unit.
• For some mobile phones, the notification message
may not be shown even if the SMS function is
supported.
0 Reducing noise/adjusting the echo
cancel level
While talking ...
· To reduce the noise: Select [On] for <NR/EC>.
• To adjust the echo volume (between 1 to 10,
initial: 4): Press [EC-]I[EC +].
· To adjust the noise reduction volume (between
-5 to -20, initial: -7) : Press [NR-]/[NR
+ ].
0 Making a call
1
Display the phone control screen.
On the source control screen:
On the <HOME> screen:
On the monitor panel:
KW-V40BT KW-V20BT /KW-V200BT
2
Select a method to make a call.
[]] From the preset list/phone book/call lists
[1] Direct number entry
[] Voice dialing
[I] Phone number list (Page 34)
ENGLISH
I
33