Menu Structure - Sony PFM-42B1 Service Manual

b) DATA EDIT

Menu Structure

The following items of the source data that is copied to the Editing RAM can be
modified as described below.
DATA EDIT
INPUT SELECT : 01100000
INPUT SELECT2 : 00000101
H FREQUENCY : 31.47 [kHz]
V FREQUENCY : 60.00 [Hz]
SYNC POL (H/V) : NEGA/NEGA
TOTAL H PIXEL : 800
LEFT EDGE : 140
H RESOLUTION : 640
TOP EDGE : 35
V RESOLUTION : 480
DOT PHASE : 128
CP PLACEMENT : 005
CP DURATION : 016
INTERLACE MODE : OFF
FILED MODE : OFF
FRAMELOCK MODE : OFF
MATRIX SELECT : ITU709
PICTURE AGC : ON
ASPECT : 4
ZOOM : 1
APERTURE INIT : MID
APERTURE HIGH : 000
APERTURE MID : 002
APERTURE LOW : 004
AUTO PLL : ON
SYNC WIDTH ( s) : 003.81
Note : A maximum of 8 lines of the above menu can be displayed on screen. The other menu items can be
displayed by scrolling the display by moving the cursor up or down.
3-8
(1) Acceptable type of input signal
(2) Horizontal frequency
(3) Vertical frequency
(4) Sync signal polarity
(5) Total number of horizontal dots
(6) Horizontal dot position to start reading
(7) Horizontal resolution (Number of dots)
(8) Vertical dot position to start reading
(9) Vertical resolution (Number of dots)
(10) Dot phase
(11) Clamp pulse width (Number of dots)
(12) Clamp pulse position (Number of dots)
(13) Interlace setting
(14) In-field processing setting
(15) Vertical sync setting
(16) Color difference matrix setting
(17) Automatic brightness adjustment setting
3
(18) Aspect ratio setting
(19) Zoom setting
(20) Aperture initial value setting
(21) Aperture data setting
(22) Aperture data setting
(23) Aperture data setting
(24) Automatic PIXEL ADJUST setting
(25) Horizontal sync signal width
PFM-42B1, PFM-42B1E