Table of Contents
Advertisement
[ When the removal of the DVD Deck ]
Before removing Pick Up PCB and DVD PCB connector, make the short circuit on the position as
shown Fig. 1 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be
damaged.
[ When the installation of the DVD Deck ]
Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD
PCB connector.
DISC REMOVAL METHOD AT NO POWER SUPPLY
1.
Remove the Back Cabinet and AV PCB/DVD Block. (Refer to item 1 of the DISASSEMBLY
INSTRUCTIONS.)
2.
Rotate the Main Gear in the direction of the arrow by hand.
(Refer to Fig. 1)
3.
Draw the Tray.
If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below.
1.
Turn Unit ON.
2.
Press and hold the 'STOP' key on the front panel.
3.
Simultaneously press and hold the '7' key on the remote control unit.
4.
Hold both keys for more than 3 seconds.
5.
The On Screen Display message 'PASSWORD CLEAR' will appear.
6.
The 4 digit password has now been cleared.
NB: The above procedure will reset ALL of the player's settings to the default factory state.
WHEN REPLACING DVD DECK
Fig. 1
Main Gear
PARENTAL CONTROL - RATING LEVEL
4 DIGIT PASSWORD CANCELLATION
Make the sort circuit
using a soldering.
Deck CD
Fig. 1
A1-2
Pick Up PCB
Advertisement
Chapters
Table of Contents
