Sony TRINITRON KV-27FS100 Service Manual page 94

Connecting Your TV
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video
cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
✍
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide
sound; you still must connect the audio cables.
Connecting a TV and Satellite Receiver
Satellite Receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.
3
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
✍
You can use the
✍
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide
sound; you still must connect the audio cables.
12
From
cable/
antenna
2
3
button to switch between the VHF/UHF and VIDEO inputs.
Rear of TV
1 3 4
Video (yellow)
Audio L (white)
Audio R (red)