Using Basic Functions Setting Up The Tv Automatically - Sony TRINITRON KV-27FS100 Service Manual

Using Basic Functions
Setting Up the TV Automatically
After you have finished connecting your TV, you can perform Auto Program to set up your channels.
When Auto Programming, the TV will automatically search for available channels and program
receivable channels.
1
Press to turn on the TV. The Initial Setup screen appears.
2
Press on the remote control or on the TV front panel to perform Auto Program, or press
to exit.
✍
The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
To perform Auto Program again
1
Press .
2
Press g to highlight Channel Setup Menu.
3
Press f to highlight Cable. Press
4
Press F or f to select On or Off according to how you connected your TV. Press
5
Press f to highlight Auto Program. Press
6
After performing Auto Program, press
To reset the TV to factory settings
1
Turn the TV on.
2
Hold down on the remote control.
3
Press and release the POWER button on the TV front panel. (The TV will turn itself off,
then back on.)
4
Release .
Initial Setup
Auto Program: [CH+]
[CH–]
Exit:
First please connect
cable/antenna
to select.
to search for channels.
to exit.
.
17