Alarm; Temperature Alarm; Door Alarm; Activating The Alarm System - Miele KDN 9713 iD Operating And Installation Instructions

Frost free fridge-freezer combination
Hide thumbs Also See for KDN 9713 iD:
Table of Contents

Advertisement

Alarm

Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if a door is left open.

Temperature alarm

An alarm will sound and the alarm
indicator light will flash if the
temperature in the freezer section
becomes too warm.
The temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The alarm will sound and the alarm
indicator light will flash,
– if the freezer door has been left open
for a while, e.g. in order to load,
re-arrange or take food out.
– when freezing large amounts of food
at once.
– if there has been a lengthy
interruption to the power supply.
Depending on the temperature in the
freezer, you should check the condition
of the food. If food has defrosted or
started to defrost, check that it is still
safe to use, and if so, use it as quickly
as possible. Defrosted food may only
be re-frozen after it has been cooked.

Door alarm

The alarm will sound if the freezer
section door has been left open for
more than approx. 60 seconds.
18

Activating the alarm system

The alarm system is always active. It
does not have to be switched on
manually.

Switching the alarm off early

The alarm will stop and the indicator
light will go out when the temperature
reaches the correct level again.
However, if the noise disturbs you, you
can switch the alarm off before this if
you wish.
^ Press the alarm off button.
The alarm will stop. The indicator
light will stay on until the correct
temperature has been reached. The
alarm system is then ready should it
be needed again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents