JVC KW-V50BT Instruction Manual page 36

BLUETOOTH
P a r i n i g a B u l e o t o h t d e i v e c f o r m
using a PIN code (for Bluetooth 2.0)
1
Display the <Bluetooth Setup> screen.
On the Home screen:
You can also display the <Bluetooth Setup>
screen by pressing [ ] on the phone control
36
h t e a t g r t e d e i v e c 2
Change the PIN code.
If you skip changing the PIN code, go to step
3.
The PIN code is initially set to "0000".
The maximum number of digits in the PIN
code is 15.
Press [Clear] to delete the last entry.
3
Search the unit ("KW-V****") from your
Bluetooth device.
4
Select the unit ("KW-V****") for your
Bluetooth device.
If the PIN code is required, enter "0000"
(initial).
When pairing is complete, the device is listed on
<Paired Device List>.
To use the paired device, connect the device
on <Paired Device List>