Table of Contents
Advertisement
EN 8
4.
TCM3.1L LA
4. Mechanical Instructions
Index of this chapter:
4.1 Service Positions
4.2 Cable Dressing and Taping
4.3 Assy/Panel Removal
4.4 Set Re-assembly
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
4.1
Service Positions
For easy servicing of this set, there are a few possibilities
created:
•
The buffers from the packaging.
•
Foam bars (created for Service).
4.1.1
Foam Bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs.
See figure
Figure 4-1
for details. Sets with a display of 42" and
larger, require four foam bars [1]. Ensure that the foam bars
are always supporting the cabinet and never only the display.
Caution: Failure to follow these guidelines can seriously
damage the display!
By positioning the TV face down on the (ESD protective) foam
bars, a stable situation is created to perform measurements
and alignments. By placing a mirror under the TV, the screen
can be monitored.
Required for sets
1
42"
Figure 4-1 Foam bars
2009-Jun-05
Mechanical Instructions
1
E_06532_018.eps
171106
Hide quick links:
Advertisement
Table of Contents
