Gigaset C610IP User Manual page 12

Configuring the VoIP connection
Select IP Account
IP 1
IP 2
IP 3
IP 4
IP 5
V
Back
Provided that your phone is set for auto-configuration (default setting), you will see the following
display. Otherwise, for more information, see
If you have received a regis-
tration name/password
and, if applicable, a user
name:
>
Press the key below
on the display screen.
>
For more information,
see .
10
If your phone cannot establish a connection to the Internet, the message Internet connection not
available is displayed.
>
Press the left display key
>
Press the right display key
(step ).
12
10
A list of all possible IP connections is shown in the display
´
(IP 1 to IP 6). VoIP connections that are already configured
are marked with ³.
´
´
´
´
OK
If necessary, press down on the control key s to select
>
a connection.
>
Press the
IP Wizard
Do you have a
§No§
code for auto
configuration?
No
§Info§
to display information about the possible causes of errors.
§OK§
to end the VoIP wizard and start the connection wizard
§OK§
display key to continue.
.
10
?
Yes
If you have received an
auto-configuration code:
>
Press the key below
on the display screen.
>
For more information,
see .
9
§Yes§